Flue accessories

Rust-free and durable. Install once and it will last!
Easy to connect and strong, Easy installation for anyone!
Use a stainless steel (SUS) flue!

Key Features

It is a single pipe that is basically used by connecting. It comes in 0.5m and 1m lengths.
There is a male/female distinction, so you must check the male/female when combining them. If you force the same parts together or bend the ends, it will be difficult to use the chimney.
The ‘male’ is the management with a V-shaped cut, and the ‘female’ is the one without a cut. The ‘su’ is inserted into the ‘female’ and connected.
The two short pipes are connected and overlap by 10 cm. (Depending on the situation, it is okay to overlap by less than 10 cm.)

This is a double-walled pipe typically installed to prevent fires caused by overheating when passing through walls or roofs. It comes in 0.5m and 1m lengths.
It has cerakwool (heat-resistant cotton) inside, so it can be installed safely and easily when passing through a wall.
* If you do not use a double pipe, you must put heat-resistant material on the passage surface and finish it with a finishing material to prevent fire.
The inside is the same as the single pipe, and there is one more 200mm pipe on the outside, so you must use 200mm as the finishing material.
Double pipes, like single pipes, have male and female parts. The pipe with the V-shaped cut is the ‘male’ part, and the pipe without the cut is the ‘female’ part.

This outdoor drain T-fitting features a 15mm socket for draining wood vinegar, rainwater, etc.
It replaces an elbow at external bends.
A latch allows easy opening and closing for convenient cleaning.
During cleaning, open the lid to easily drop ash or debris down below.
Both connection points of the Drain T are female.

This flue protection net is installed by inserting it onto the single pipe directly connected to the stove.
Choose between 0.6m or 0.9m lengths based on site conditions or customer preference.
While the flue guard is installed for aesthetic purposes, it is also recommended for safety. The section of the flue pipe closest to the stove generates significant heat and may be within reach, posing a risk.

This T-piece is installed at the very end of the external flue pipe.
External backdrafts can cause unstable combustion. We strongly recommend installing a backdraft prevention cap or backdraft prevention device.
All connection points are ‘male’.

This cap is installed at the very end of the external flue pipe.
External backdrafts can cause unstable combustion. We strongly recommend installing a backdraft prevention cap or backdraft prevention device.
All connection points are ‘male’.

This backdraft prevention hat is installed at the very end of the external flue.
It is relatively more effective against rainwater and backdrafts than the T-piece and normal hat.
For cost-effectiveness, please choose the backdraft prevention hat.
All connection parts are ‘male’.

This premium Backwind preventer is installed at the very end of the external flue pipe.
It is relatively more effective against rainwater and backdrafts than the T-piece and normal hat.
For reliable rainwater and backdraft prevention plus a premium appearance, choose the premium Backwind preventer.
All connection points are ‘male’.

This finishing plate covers sections passing through walls or ceilings.
When using a double pipe, since the double pipe is 200￠, use the 200￠ finishing plate.
※ It is acceptable to finish the double pipe with silicone.
When not using a double pipe, before attaching the finishing plate, fill the area around the flue pipe with non-combustible materials like ceramic wool or soil to prevent fires caused by heat conduction.
A square steel finishing plate is available for use when finishing a wide area. (150￠ = 390*390 / 200￠ = 540*540)

This hanger set secures the flue pipe to walls or roofs.
It consists of a bracket, ring, fixing bolt, expansion bolt (50cm), and support bracket set.
A wall block for concrete or brick walls must be purchased separately.

This wall mount bracket is used when a more secure fixation than a hanger is required.
Compared to hangers, its distance adjustment range is limited, but it provides significantly stronger adjustment.
A wall anchor block is required for use on concrete or brick walls and must be purchased separately.

Installation case